Fluid Conditioning

ISOCLEAN Fluid Conditioning
Conditioning Services can be performed on site, often while your system is running thus avoiding any costly downtime.
Contact Us
SHOCO Industrial Solutions
5135 East 74th Avenue
Commerce City, CO  80022
303.289.1677

Scott Hohnstein
Director
303.929.9114

Paul Johnson
Service Specialist
303.880.2275

Becky Hohnstein
Administration
303.929.9111


The Fluid Conditioning Services will remove harmful contaminants such as water, dirt and dissolved gasses from lubricating oils. Oils that are clean and have a reduced amount of contaminants will have a lower oxidation rate, better hydrolytic stability and exhibit better water separability. The result is better lubrication and extended equipment life with reduced operating costs and decreased unscheduled down time. Rocky Mountain Industrial Solutions has the experience and equipment utilizing the latest technology for reconditioning all types of oils from ISO 5 spindle or transformer oil to ISO 1000 heavy gear and circulating lube oils.
ISO Cleanliness Codes and Water Contamination are used in industry to describe the condition of circulating fluids. A reduction in contamination levels of several ISO code numbers can extend the life of a machine component by up to 10 times. Likewise, a reduction in parts per million of water from 1000 ppm to 100 ppm can result in a component life increase of over 3 times.

The Fluid Conditioning Services consists of a preliminary assessment by trained technicians to determine the fluid’s condition. A report describing the benefits and estimated cost for reconditioning services is provided. If service work is performed, a comprehensive “Proof of Performance” report is supplied documenting the work performed and verification from one or more independent laboratories.
(See Proof of Performance link)
 
The
Fluid Conditioning Services will remove harmful contaminants such as water, dirt and dissolved gasses from lubricating oils. Oils that are clean and have a reduced amount of contaminants will have a lower oxidation rate, have better hydrolytic stability and exhibit better water separability. The result is better lubrication and extended equipment life with reduced operating costs and decreased unscheduled down time. We have the experience and equipment utilizing the latest technology for reconditioning all types of oils from ISO 5 spindle oil to ISO 1000 gear and circulating lube oils.

ISO Cleanliness Codes and Water Contamination are used in industry to describe the condition of circulating fluids. A reduction in contamination levels of several ISO code numbers can extend the life of a machine component by up to 10 times. Likewise, a reduction in parts per million of water from 1000 ppm to 100 ppm can result in a component life increase of over 3 times.

The Fluid Conditioning Services consists of a preliminary assessment by trained technicians to determine the fluid’s condition. A report describing the benefits and estimated cost for reconditioning services is provided. If service work is performed, a comprehensive “Proof of Performance” report is supplied documenting the work performed and verification from one or more independent laboratories.
(See Proof of Performance link)

 
The Fluid Conditioning Services are performed on site and in many cases when equipment is in operation. Lubricating oil can also be transported and reconditioned at our facility while system flushing and cleaning is being performed. Our crews are equipped with sophisticated equipment to accurately measure water content and particle counts in real time thus insuring that appropriate cleanliness levels have been achieved. 

          
 

                        PROGRESSION OF FLUID DEWATERING FROM START TO FINISH